A strong 350oz at .11 transit speed, our new G11 servo is a perfect upgrade for your stock crawler, such as Axial Capra, SCX10.2, TRX4, TRX6, Gen 8, and Element. You do not need a BEC with this servo because it runs directly off of your battery, from 2s to 4s lipo. Uses all-metal gears and is compatible with the G13 and G12 gear set, which makes for an easy upgrade or replacement. PA66+45 composite/aluminum case for durability and heat sink. These servos operate under water, as a high-level water-resistant coating is applied before assembly. Takes a 25T servo horn. Recommended for stock scale crawlers, not recommended for bombers or bashers. Pair with our no-solder connectors for a clean, simple installation solution.
*Dead band: 2μs 1520μs/330hz
*Operating speed(11.1v): 0.13sec/60°
*Operating speed(14.8v): 0.11sec/60°
*Stall Torque (11.1v) 290oz/in
*Stall Torque (14.8v) 350oz/in
*Weight: 62g (2.19oz)
*Spline count: 25T
Note: JST solder-on connector included; no-solder connectors available separately. No-solder connectors are for use only with single-battery applications; DO NOT USE with multiple-battery setup.
Note: the servo power wire has to be unplugged when not in use. We recommend routing the power wire from the servo to the battery, so that when you unplug the battery, you unplug the servo as well.
G11 350oz direct-powered servo
G11 servos come with a 90-day warranty against manufacturer defects. Water damage, rust, casing damage from use, or broken gears from abuse or not using a gear saver is not covered under warranty. Warranty claims may be made by original purchaser only.
If you have a warranty question, contact us describing the problem. Be sure to provide name, mailing address, and telephone/email so we can follow up with you, as well as proof of purchase details. Customer is responsible for shipping the servo to 3BrothersRC in the event of inspection and repair.